CLASS "A" FOAM

Plain water's ability to extinguish wood and structure fires has always been assumed. However, studies have shown only a 5-10% effectiveness because of the cohesion of water molcules which prevent full penetration. This in turn requires the delivery of large volumes of water creating greater labor demands and increased water damage to the structure and contents. With the use of Water StretcherŽ Class A Foam Agent the surface tension of water molecules is greatly reduced allowing one gallon to do the work of 10, reducing the labor demands and water damage. Water StretcherŽ Class A Foam has been demonstrated effective in tire, oil and automobile fires through dense foam generating. The dense foam generated by Water StretcherŽ enables the firefighter to quickly gain control of flammable vapors, removes oxygen from the combustion process and insulates and saturates the unburned fuel. Foam/water wetting agent mixing ratio: approximately 1 quart Water StretcherŽ Foaming agent to 100 gallons water increases water penetration approximately 10 to 1 over plain water by overcoming surface tension of water molecules.

COMPRESSED FOAM AIR UNIT

Model 25/300

Features:

• Aircooled Engine
• Centrifigual Pump
• Compressor w/Electric Clutch
• Illuminated Control Panel
• Electric Reel w/150' 1" line
• Capable of Drafting
• 300 Gallon POLLYpoplyene Tank

Modual Unit Only also available

- PUMPER TRUCK Systems also available
- Custom Designed Units

DENSE FOAM GENERATING

enables the firefighter to quickly gain control of flammable vapors, remove oxygen from the combustion process, insulate and saturate the unburned fuel.

WATER STRETCHER

accomplishes this process through the combining of a foaming agent, water and air.

WATER STRETCHER

is built to the highest standard for rugged reliability and has retained simplicity in maintenance and operation.

WATER STRETCHER

is available in several models:

• Pumper Units
• Customized Units
• Modual Units

Return to The Top of The Page

Return to The NEEL Assoc., Inc Main Page

SKIDS

WATER SKID
18 HP BS Engine Centrifugal Pump Fire Pump 25/20 Electric Reel w/ 100" 1" Booster Hose & Nozzle Illuminated Panel Brass Valves (1-1/2" d: 1-2-1/2" S Water Level Gauge on Tank 300 POLLYproplyene Tank 375 gpm @ 20 psi 125 gpm @ 120 psi 50 gpm @ 150 psi Options: Waterous and Darley Pump Units Steel, Stainless Steel or Aluminum Tanks Manual Reel 1-1/2 Hose Bed Custom Tank Sizes	18 HP Engine Centrifugal Pump Fire Pump 20/15 190 PSI Electric Reel w/ 100" 1" Booster Hose & Nozzle 2 1-1/2 Discharges 1 2-1/2 Suction 300 Gallon POLLYproplyene Tank Water Level Gauged Tank Illuminated Panel 350 gpm @ 20 psi 100 gpm @ 120 psi 50 gpm @ 150 psi Options: Foam System High Pressure Pump

NFPA-Foam IT - Foam Injection Systems

For use on Pumpers, Boosters, Skids or other Units

Return to The Top of the Skids Page

Return to The NEEL Assoc., Inc Main Page

For a demostration of the firefighting power of
WATER STRETCHER & OTHER FIREFIGHTING EQUIPMENT
Contact:
NEEL ASSOC., INC.
P.O. Box 20126
Waco, TX 76702
Phone: (254)799-9176
800-433-3402-Texas